The S320
can be used with flow elements producing
differential pressure such as orifice plates,
nozzles, venturis, annular averaging pitot tubes
and laminar flow elements.
Devices like
turbine, vortex, impeller, positive displacement
meters may be used with appropriate transducers.
Regardless of sensor type, all flow devices will
benefit from the S320's capability to
characterize the flow element and transducers
from test or calibration data.
More information:
Use the Adobe Acrobat Reader for the following
Documents
 Laminar Flow Elements -
Technology for the Precise Measurement of Gas
Flow
(Document
about Laminar Flow Elements)
LMF S320 Controller-Software
(Manual of
the S320 Flow-Calculation Software)
S320 LMF Software
Configuration Tool
This program
allows you to easily configure a S320 running the
LMF Software.
Download
Click here to download the S320 LMF
Software Configuration Tool.
(ZIP-File "s320lfe.zip", 249 kB, requires
MS-Access 97)
Installation
To install,
unzip the file S320LFE.MDE and then open it with
Access 97.
Establish a
serial link between a RS232 interface of your PC
and the RS232 interface Ser0 of the S320.
Screenshots
- Configure
the standard display
- Configure
inputs
- Configure
serial settings
- Configure
analog outputs
|
